The SD series of modular electrical disconnects is used for breaking and disconnecting on low voltage equipment loads at nominal current from 16 to 125 Amps.

Our SD1 Series non-fused electrical disconnects allow breaking and disconnecting on low voltage equipment loads at a nominal current range from 16 Amps to 40 Amps.

An SD1 series electrical disconnect switch is DIN rail or panel-mountable. A complete line of standard accessories is also available when your purchase an SD1 series electrical disconnect switch.

Our SD2 Series non-fused quick disconnects allow breaking and disconnecting on low voltage equipment loads at a nominal current range from 63 Amps to 125 Amps.

An SD2 series disconnect switch is DIN rail or panel-mountable. A complete line of standard accessories is also available when you pruchase an SD2 series disconnect switch.

These safety switch disconnect models are most commonly used for the following applications:

• Main switch
• Switch for motors
• Safety switch
• Disconnect

Non-fused quick disconnect

Features

Our SD series safety switch disconnect model features include:

• High breaking capacity (AC 22A - AC 23A)
• Double break contacts
• High electrical and mechanical endurance
• Resistance to damp heat
• IP20 degree of protection
• 35 mm DIN rail mountable or screw mountable
• Modular window 45 mm
• SD2 series models are padlockable in 0 position
• Handle with or without door interlock; handle padlockable with up to three padlocks in 0 position
• Wide range of accessories
  

Listings

• UL508/cUL File: UL E226699
• IEC File No. 60947/1-3