| FA-CABKIT |  |
Universal cable kit for all CPUs (with RS232C ports) and personal computers. Comes with four pre-wired D-Sub to modular adapters, which can connect most RS-232C ports using a single unshielded 7ft. (2.1m) cable (included). Includes manual with product. Note: Does not include 15-pin connector for bottom port of of D2-250(-1) or D2-260 CPUs. |
| FA-ISOCON |  |
Universal, isolated RS232C to RS422/RS485 converter. Switch selectable for ANTE (Automatic Network Transmitter Enable) or RTS/CTS handshaking, works with all DirectLogic PLC families and virtually any serial device. Isolation reduces network data problems caused by noisy environments. Powered directly from the 5V pins on most DirectLogic CPU ports, from a PLC base 24 VDC power supply, or from an external power supply. Cables and connectors to most COM ports (RJ12, 9-pin D-shell female, 25-pin D-shell male) provided. Integral DIN rail clamp or can be panel mounted. Manual included with product |
| FA-ISOCON-P |  |
Replacement terminal plugs for FA-ISOCON, includes all three plugs. |
| F2-UNICON |  |
RS232C to RS422 converter. Converts RJ12 RS232C port to a DB25male RS422 port. Powered directly from the 5V pins on most Direct Logic CPU ports. Includes 1ft cable with two RJ12 6P6C plugs, and DIN rail mounting kit. Includes manual with product. The F2-UNICON provides no signal isolation so it is not recommended for noisy industrial environments. |
| FA-UNICON |  |
In-line, DB25, RS232C to RS422/RS485 converter. Connectors provided for the D3-422-DCU and to connect a DirectLogic RJ11/RJ12 RS232C port to a female RS422/RS485 port connector. Power directly from the PLC base 24VDC supply or an external power supply. Includes manual with product. The FA-UNICON provides no signal isolation so it is not recommended for noisy industrial environments. Connection to a PC RS232 COM port requires a custom cable. |
| FA-15HD |  |
15-pin high density D-Sub connector for Port 2 of DL06, D2-250(-1), and D2-260 CPUs to RJ12 6P6C connector. Used to connect RS232 Port 2 of DL06, D2-250(-1), and D2-260 CPUs to personal computers using the FA-CABKIT included unshielded cable, or a D2-DSCBL shielded programming cable. Do not use with DV-1000 or D2-HPP. |
| USB-RS232 |  |
6 ft. USB to RS-232C serial adapter cable transparently connects serial devices to PC applications via a USB port. USB-A male connector to 9-pin D-shell male connector. If needed, drivers can be downloaded from http://support.automationdirect.com/downloads.html#tools (choose USB-RS232 adapter driver). |