Greater flexibility in one unit
Each module can be configured as a
• Access Point • Bridge • Repeater • Client/Station • Router

The Niplex-WIFI has an Ethernet port (10/100 BaseT) as well as two serial ports (RS232 and RS485) and on-board I/O for local and remote link status, or external status transfer.

Industrial strength for industrial applications
The Niplex-WIFI has been designed and built for demanding industrial applications.

• Reliable data transfer in congested industrial environments - high RF power and receiver sensitivity
• Industrial ratings, -35 degC to 65 degC, humidity to 99% - designed for demanding applications
• Secure data transfer, military grade 128-bit AES encryption, plus commercial grade WEP encryption
• Firewall protection via message filtering at MAC address level
• Redundancy for critical applications, automatic changeover at Access Point
• Easy to use configuration and powerful diagnostics via web-browser
• Remote configuration and diagnostics via the wireless link.

Long & short range applications

• High RF output (100 or 300 mW) and superior receiver sensitivity gives excellent penetration in congested industrial environments, through buildings, factory walls and steelwork.
• Repeater functionality increases wireless range even further.

Features

• Transmission at 2.4 GHz, the only truly international unlicensed frequency band
• Reliable data throughput using Direct Sequence Spread Spectrum (DSSS) technology; assures reliable  performance even in high-multipath and noisy RF environments.
• Will function as a serial modem and Ethernet modem simultaneously
• Embedded Protocols: TCP/IP, UDP ARP, PPP, ICMP, HTTP, FTP, TFTP, TELNET
• Long range with high speed (up to 11 Mbps total over-the-air bandwidth in point-to-point and multipoint applications), up to 5 Km (farther using     repeater features

• Din Rail Mount