a

FA-DCDC-1 - Isolated Multiple Outputs

Four Outputs: +/-10VDC and +/-5VDCf

The FA-DCDC-1 is a DIN-rail mount DC converter, ±10VDC, ±5VDC isolated power supply used to eliminate ground loops and address isolation issues when interfacing to PLC analog I/O modules. Features of the design handle many types of configuration applications and problems.

  • Four Outputs: +/-10VDC and +/-5VDC
  • Each output is rated at 125mA.
  • The ±10V and ± 5V outputs are fixed at 1.0% regulation.
  • Input voltage range is 12-24V DC ±15% at approximately 6.7 Watts.
  • Input voltage can be from a regulated source (power supply) or un-regulated source (battery, solar cells)
  • Isolation (1500V) from input to outputs and output to output

Features

  • Wide input voltage range
  • Overload and short circuit protection
  • Low ripple and noise
  • I/O-isolation 1500 VDC
  • Compact, slim plastic case
  • Reliable snap-on mount on 35mm DIN rail
  • Wall-mount bracket built-in
  • 3-year warranty

 

Editorial Contact: A Davies
Phone: 07-55307799
Email: market@automationdirect.com.au