Terminator I/O

Terminator I/O is the most practical distributed I/O system you can buy.

Terminator I/O provides you with an industrial I/O system with remote I/O, distributed I/O and digital I/O module capabilities. It combines the I/O points with their field terminations into a modular package to save panel space and money. With Terminator I/O, you can use distributed I/O nodes close to field devices for faster and more efficient wiring and troubleshooting.

Terminator I/O was custom-designed for AutomationDirect by Koyo (the same people who designed the original GE Series One PLC), a trusted name in control technology since 1983.

• Network interface modules supporting Ethernet, Profibus, DeviceNET, MODBUS and Koyo remote I/O;
  some adapters include an on-board RS232 serial port.
  
  
• Discrete and analog industrial I/O modules with modular terminal bases
  
  
• Configuration flexibility by plugging together a network interface module with up to 16 I/O modules.
  Use local expansion for large I/O drops. No more confining I/O bases.
  
  
• AC or DC power supplies. For high power systems, combine multiple supplies on a single I/O set.
  
  
• Horizontal or vertical DIN rail mounting

Two sizes of terminal bases accomodate all I/O modules

• Half-size bases for up to 8-pt. modules
• Full-size bases for up to 16-pt. modules
• Triple-stack terminal blocks are standard and multi-wire devices are easy to connect
• Same bases for all I/O modules - AC, DC, and analog

Network interface modules for your favorite fieldbus

New module provides high-performance, low-cost Ethernet link --- The new T1H-EBC100 module provides a high-performance Ethernet link between Terminator I/O and any connected client hardware or software system for applications in PC Control, PLC Remote I/O, or data acquisition. Terminator I/O is a distributed Field I/O system that combines the I/O points with their terminal blocks into a modular package to save cost and panel space. The T1H-EBC100 module supports TCP/IP, UDP/IP, DHCP, and IPX at 10/100 Mbps. It also supports MODBUS TCP/IP protocol, the most widely used open protocol in industrial manufacturing.

The module can be configured using an Internet browser to access the module's HTML configuration page, or with NetEdit, a free Windows Software configuration utility. The module supports the full lineup of Terminator I/O discrete, analog, and motion control modules.

The ERM/ EBC system can also support a much higher analog I/O count than the T1K-RSSS remote I/O system. The T1H-EBC and T1HEBC100 modules support the full line-up of Terminator I/O discrete and analog modules.

• Ethernet - the "common sense network", 10/100 Mbps
• DeviceNet, Modbus and Koyo remote I/O, even Profibus
• All network modules include an on-board RS-232 serial port, ideal for operator interfaces or other serial devices (except Profibus modules), and Ethernet modules even support connectivity to bar code readers

Cunet

• CUnet A Whole New Way of Networking T1K-HSIO
• The chipset,"MKY40",has own communication protocol built-in.
• Up to 64 stations,4096 I/O points per 1 Network.
• Super high-speed data communication.
• The CUnet does not require master/slave arrangement.
• Supporting multi-drop network connection.
• Mail function can be used for the data transmission to communicate more than 4096 I/O points.
• No programming is necessary for communication module setting.(Only SW settings)
• Each shared data will allocated on link relay (GI/GQ),so you won't be conscious of distinguishing I/O points between stations while programming.
• Mail function is simply controlled by four instructions.
• CUnet modules are available for all DL-05, DL-06,and Terminator I/O.
  

Power supplies: freedom of choice, freedom to expand

• DC power supplies for
• AC versions only
• AC supplies include 24 VDC auxiliary supply for convenient field device wiring
• Need more power for high-current devices or modules? Just add another power supply before the next module in the system!

Discrete I/O with the features you need

• 8-point input modules starting
• All DC input modules are sink/source jumper configurable
• Diagnostic LEDs for blown fuses and 24 VDC power on applicable modules
• "Hot-swap" capability makes troubleshooting easy

Analog modules at super-low price per channel

• 8-channel input modules, or choose a 16-channel output module
• 0-20mA/4-20mA and unipolar and bipolar voltage models available
• All analog ranges are software configurable - no jumpers required!
• "Hot-swap" analog modules for fast system repair

Local expansion up to two additional rows!

• Full backplane expansion through cables
• Connect up to 16 modules across three total rows by plugging expansion cable from the right side of one module to the left side of the next - the system automatically recognizes the I/O!
• Optional cable that includes 24 VDC pins maximizes your power supply capability