Do you need an industrial strength power supply?
DC Power Supplies
- Metal Slim-Line Case
(RHINO PSM Series) 
12 VDC and 24 VDC Power Supplies
AutomationDirect is now offering
a new generation of switching power supplies.
The RHINO PSM series are versatile switching power supplies that come
in a rugged ultracompact metal case made to withstand harsh industrial
environments.
The RHINO PSM Series models are our most versatile DIN-rail mountable
switching power supplies and include a 3 year extended warranty.
The rugged, ultra-compact metal case is shock and vibration resistant
to IEC 68-2. The RHINO PSM Series models provide short circuit, overvoltage
and overtemperature protection. These models accept universal 100/ 230
VAC input voltage for worldwide use and provide multiple output terminals
for easy wiring. Terminal connectors are included.
Features include:
- 6.5 A (78 W) and 13 A (156 W) at 12 VDC
- 3.75 - 25 A at 24 VDC (90 - 600 W)
- Approved for hazardous locations (FM 3611, ANS1/UL 60079-15 and ATEX94/9/EC)
- Model PSM24-090S-N meets NEC Class 2
- Universal 100/ 230 VAC input voltage
- Adjustable output voltage
- Low output ripple
- Power Good signal
- Remote ON/OFF
- Optional wall mounting
- Specialty modules for redundancy, power backup and UPS (see sections below for further detail)
- Convection cooling, no internal fan, thermal overload protection
- Full CE compliance including EN61000-3-2
- Industrial approvals:
IEC/EN 60950
UL/cUL 60950
UL 508C listed
FM3611 listed
ANS1/UL 60079-15
(ATEX 94/9EC)
PSM Series Power Supplies - Part Numbering System
RHINO PSM Series part numbers use the following
numbering convention: PSM 24 090S-N
The first 3 letters represent the series name: PSM = slim-line
metal case
The next 2 digits indicate the output volts (e.g. 24 = 24 VDC)
The next group of 4 characters (090S) indicate the output watts: 090,
and the S indicates a Screw Terminal Connector
The last character (N) indicates: NEC Class 2
----------------------------------------------------------------------------------------------------------------------------------------
SPECIALTY MODULES
RHINO PSM24-REM360S Redundancy Module
Using two PSM24 power supplies and a redundancy
module, you can configure a redundant power system, featuring active current
sharing, without any additional components. Even if one power supply fails
or becomes disconnected, the second unit will supply the full current
to the load.The module has an alarm contact for monitoring of operations. The inputs are hot-swappable and can be loaded up to 15 A each. Terminal plugs are included.
RHINO PSM24-BCM360S Battery Control Module The battery control module, when combined with a PSM24 power supply, makes a perfect DC-UPS system by providing the means to charge and monitor an external lead acid battery. The power supply charges the connected battery and keeps it in charge mode. Consequently, the output voltage of the system is equivalent to the battery voltage.
To avoid overcharging the battery, an external temperature sensor(sold separately) adjusts the battery voltage automatically to the required end of charge voltage. This configuration extends the battery life.
RHINO PSM24-BFM600S Buffer Module The buffer module will maintain the output voltage of a 24 VDC power supply after brownouts or voltage dips for typically up to 200 ms at 25 amps, or up to 4 seconds at 1.2 Amps. It is a cost effective alternative to a battery-based backup system.
The operation modes are indicated by an LED on the front panel. Storing the energy in a capacitor bank, this backup solution is completely maintenance free. Its storage capacity does not deteriorate over the lifetime of the unit.
----------------------------------------------------------------------------------------------------------------------------------------
Accessories for RHINO PSM Series Power Supplies A variety of accessories is available to complement the RHINO PSM Series power supplies. Choose panel mounting brackets and replacement plug kits based on the size of the power supply. There is also a temperature sensor for the battery control module and replacement link cable for the redundancy and battery control modules.
- PSM-PANEL1 - Panel mounting bracket. 1 bracket type A includes M4-screw (DIN 74-4fA) for 70W, 90W, 140W, 180W PSM power supplies
- PSM-PANEL2 - Panel mounting bracket. 2 brackets type A include M4-screws (DIN 74-4fA) for 360W, 600W PSM power supplies
- PSM-PK1 - Replacement plug kit for PSM series with 72W and 90W outputs
- PSM-PK2 - Replacement plug kit for PSM series with 144W, 180W and 360W outputs
- PSM-PK3 - Replacement plug kit for PSM series redundancy module
- PSM-PK4 - Replacement plug kit for PSM series buffer module
- PSM-PK5 - Replacement plug kit for PSM series battery control module
- PSM-TS - Temperature sensor for PSM24-BCM360S battery control module
- PSM-JC01 - Replacement link cable
for PSM series redundancy module PSM24-REM360S and battery control module
PSM24-BCM360S
